Con esta herramienta te facilitamos un acceso a todas las ofertas y demandas de tecnología europeas y a búsquedas de socios para participar en propuestas europeas de I+D publicadas en la red Enterprise Europe Network, pudiendo filtrar los resultados para facilitar las búsquedas más acordes con tus necesidades.

¿Quieres recibir estos listados de oportunidades de colaboración en tu correo de forma periódica y personalizada? Date de alta en nuestro Boletín

Para optimizar los resultados de la búsqueda, se recomienda utilizar términos en inglés.

Dispositivo de comprobación automática de condensadores de potencia

Resumen

Tipo:
Oferta Tecnológica
Referencia:
TOCZ20191015002
Publicado:
25/10/2019
Caducidad:
25/10/2020
Resumen:
Investigadores de una universidad checa han desarrollado e implementado con éxito un dispositivo especial que permite comprobar condensadores de potencia cuando la corriente alterna pasa a través de ellos, normalmente con alta frecuencia y unidades de hasta decenas de amperios, a la vez que se reducen la energía eléctrica necesaria y las demandas de equipamiento de pruebas. Como ventaja cabe destacar la compensación altamente precisa de la potencia reactiva del condensador en el circuito de medida y la adecuación del circuito de medida con el generador excitador. Los investigadores buscan fabricantes de condensadores de potencia con el fin de establecer acuerdos de licencia.

Details

Tittle:
Device for automatic testing of power capacitors offered for licensing
Summary:
Researchers from the Czech university have developed and successfully implemented a special device that allows to test power capacitors in the mode when the alternating current passes through them, usually with high frequency and units up to tens of amperes, while the needed electric power and demands for the testing equipment are minimized. The researchers are looking for manufacturing partners interested in a licensing agreement.
Description:
A team of the Czech researchers have developed and successfully tested a new device, which principle is based on the invention that tested power capacitor is complemented with a low-loss inductor with loss factor comparable to the loss factor of the tested power capacitor (or lower) to form a parallel oscillating circuit.

Nowadays, the capacitors are tested using Ohms method.
The capacitor is feed with power signal source and the Voltage and current values are observed. The drawback of such tests is that all the current and voltage used for the test must be supplied with the signal source and the source is loaded with reactive power.

The newly introduced equipment enables ultra-precise reactive-power compensation of the tested capacitor in the measuring circuit and matching of the measuring circuit to the driving generator by completing the tested capacitor with the inductor so that the resonant circuit is tuned to the measuring frequency.

The inductor´s inductance is set in the way that at the testing frequency it has the same reactance as the tested power capacitor. The described solution ensures the needed precise compensation of the tested capacitor´s reactive power, which can be viewed as complementing the tested capacitor with the inductor in the way that creates an oscillating circuit tuned at the testing frequency, by automatic correction of the measuring frequency according to instantaneous value of
the oscillating frequency of the measuring circuit. The frequency is controlled by a feedback loop with the voltage-controlled oscillator, integrator and phase detector.

The researchers are looking for manufacturing partners (e.g. manufacturers of power capacitors) interested in a licensing agreement. The subject of the licensing will be know-how (power capacitor principle, detailed scheme of working etc.) as well as know-how for manufacturing of the power capacitor device.
Advantages and Innovations:
-Highly accurate compensation of the reactive power of the tested capacitor in the measuring circuit and matching the measuring circuit with the exciter generator
- The newly developed and tested power capacitor reach the condition when the exciter generator supplies no reactive power and the delivered real power, covering losses in the measuring circuit elements
- The device allows (for stabilization of the tested capacitor) load level during testing.
Stage of Development:
Already on the market
IPs:
Patent(s) applied for but not yet granted,Patents granted
CommeR Statunts Regarding IPR Status:
Czech patent granted, European patent (EPO) application not yet granted.

Partner sought

Type and Role of Partner Sought:
The university would like to cooperate with a partner from industry (e.g. manufacturers of power capacitors), who would like to manufacture the offered technology based on licence agreement.

Client

Type and Size of Client:
University
Already Engaged in Trans-National Cooperation:
Si
Languages Spoken:
Czech
English
Slovak

Keywords

Technology Keywords:
04002005 Generadores, motores eléctricos y conversores de potencia
04007001 Gestión de la energía
04002012 Otra maquinaria
03004004 Tecnología e ingeniería eléctrica / aparatos eléctricos
09001004 Tecnología eléctrica relacionada con la realización de medidas