Con esta herramienta te facilitamos un acceso a todas las ofertas y demandas de tecnología europeas y a búsquedas de socios para participar en propuestas europeas de I+D publicadas en la red Enterprise Europe Network, pudiendo filtrar los resultados para facilitar las búsquedas más acordes con tus necesidades.

¿Quieres recibir estos listados de oportunidades de colaboración en tu correo de forma periódica y personalizada? Date de alta en nuestro Boletín

Para optimizar los resultados de la búsqueda, se recomienda utilizar términos en inglés.

Nuevo catalizador libre de metales nobles para la producción de óxido de propileno


Oferta Tecnológica
Una universidad española ha desarrollado un nuevo catalizador rentable libre de metales nobles para obtener óxido de propileno a partir de la oxidación selectiva de propileno. El óxido de propileno es un compuesto que presenta una elevada reactividad y especificidad química hacia la formación de polímeros. Este catalizador no utiliza agentes peligrosos ni altamente contaminantes y no produce grandes volúmenes de subproductos de reacción, mostrando una alta selectividad hacia el óxido de propileno. El principal aspecto innovador del sistema catalítico es que se basa en níquel, ofreciendo una alternativa sostenible para la producción industrial de óxido de propileno a bajo costo y sin el uso de metales nobles. La universidad busca fabricantes de catalizadores interesados en la explotación comercial de la tecnología. La cooperación se establecerá en el marco de un acuerdo de licencia de patente o colaboración técnica.


New noble metal-free catalyst for the production of propylene oxide
A Spanish university has developed a new and cost-effective catalyst without noble metals to obtain propylene oxide (PO) from the selective oxidation of propylene. It does not make use of dangerous or highly contaminating agents, and does not produce high quantities of reaction by-products, showing a high selectivity towards PO. Catalyst manufacturing companies interested in the commercial exploitation of this technology via patent licensing or technical collaboration agreements are sought.
Propylene oxide (PO) is a compound that presents a high reactivity and chemical specificity towards the formation of polymers. These properties make this compound useful as a prepolymer for the synthesis of polyurethanes, polyether, polyols and other polymers. It is estimated that more than 13 million tonnes of this chemical will be produced by 2020.

Nowadays, the industrial scale synthesis of PO is carried out using propylene as raw material, based on non-catalysed reactions in liquid phase using dangerous and highly polluting agents such as chlorine and hydrogen peroxide. In addition, these processes produce large quantities of by-products in the reaction. These by-products reduce the efficiency of the process and significantly increase the cost of the target product.

For these reasons, in recent years, the scientific community is focusing on the development of catalysts as a more sustainable alternative, which produce the minimum amount of reaction by-products, both in liquid and gas phases. In particular, there is a growing interest in performing the selective oxidation of propylene to generate PO in the gas phase, because the reagents used to carry out this reaction are less toxic and hazardous.

In the latter case, there are several works in the literature with new heterogeneous catalysts that present good catalytic properties (propylene conversion and selectivity towards the PO) for the reaction of selective oxidation of propylene to PO in gas phase. Among these, the catalysts based on gold nanoparticles deposited on titanosilicates (Au/Ti-SiO2) stand out. However, their high cost is their main drawback.

In this sense, a Spanish research group has developed a noble metal-free catalytic system for its use in the selective oxidation reaction from propylene to propylene oxide (PO), mainly using gas-phase H2/O2 mixtures. This system presents catalytic properties (in terms of propylene conversion, selectivity to PO and H2 efficiency), superior to catalysts based on noble metals such as gold.

This catalyst is composed of nickel nanoparticles dispersed on an inorganic silica-based support. The inorganic support, in powder form, is selected from silicate and titanosilicate.

The preparation of this catalytic system involves the following steps:
a) impregnation of the inorganic support with a nickel precursor (nickel nitrate) dissolved in water,
b) addition to the solution obtained in step (a) an alkaline substance to reach a pH of 9-11,
c) washing and filtering the suspension obtained in step (b) until reaching a neutral pH,
d) drying the product obtained in step (c).

While the inorganic support obtained in stage (a) is obtained through the following stages:
i. addition of the silica based precursor to a previous solution of urea and surfactant with acetic acid,
ii. heating the product obtained in stage i to a temperature between 30 - 45 ºC for 15-25 h,
iii. removal of urea,
iv. calcination of the product obtained at iii between 500-600ºC for 5-7 hours.

This catalytic system has been used in selective oxidation reactions to obtain propylene oxide from propylene in gas phase, obtaining conversions higher than 7% with a selectivity towards the desired product above 90% using small amounts of Nickel and with high hydrogen efficiencies for the generation of propylene oxide.

This catalyst is useful for the selective oxidation reaction of propylene in the gas phase. Then, catalyst manufacturing companies interested in obtaining cost-effective catalysts based on non-noble metals (Ni) with a high selectivity towards propylene epoxide in the selective oxidation of propylene are sought. The Spanish university is open to discuss with interested companies different ways of commercial exploitation of the technology: patent licensing agreements or technical collaboration agreements to further develop the catalyst or to adapt it to the company´s needs.
Advantages and Innovations:
The main innovative aspect of the catalytic system is that it is based on Nickel, presenting itself as a sustainable alternative for the industrial production of PO at low cost and without the use of noble metals.

The catalytic system described above has the following advantages:

- Free of noble metals, reducing the cost of the catalyst and therefore the overall cost of producing propylene oxide from propylene.
- Conversions and selectivities similar to those obtained with noble metals (specifically, gold) are obtained.
- It does not use dangerous or highly contaminating agents.
- No large quantities of by-products are produced in the reaction.
Stage of Development:
Under development/lab tested
Patent(s) applied for but not yet granted
CommeR Statunts Regarding IPR Status:
Spanish patent.

Partner sought

Type and Role of Partner Sought:
- Type of partner sought: Industries.
- Specific area of activity of the partner: Catalyst manufacturer.
- Task to be performed: Commercial exploitation of the technology via patent licensing agreement or technical collaboration agreement in order to further develop the technology, to adapt it to their needs, etc.


Type and Size of Client:
Already Engaged in Trans-National Cooperation:
Languages Spoken:


Technology Keywords:
02007006 Fine Chemicals, Dyes and Inks
03004002 Inorganic Substances
05001003 Química inorgánica