Con esta herramienta te facilitamos un acceso a todas las ofertas y demandas de tecnología europeas y a búsquedas de socios para participar en propuestas europeas de I+D publicadas en la red Enterprise Europe Network, pudiendo filtrar los resultados para facilitar las búsquedas más acordes con tus necesidades.

¿Quieres recibir estos listados de oportunidades de colaboración en tu correo de forma periódica y personalizada? Date de alta en nuestro Boletín

Para optimizar los resultados de la búsqueda, se recomienda utilizar términos en inglés.

Tecnología de fabricación de puertas metálicas doblando la hoja de la puerta soldada

Resumen

Tipo:
Oferta Tecnológica
Referencia:
TORU20151206001
Publicado:
24/12/2015
Caducidad:
24/12/2016
Resumen:
Una empresa rusa ha desarrollado una tecnología de fabricación de puertas metálicas doblando la hoja de la puerta soldada. Esta tecnología permite incrementar significativamente la tasa de producción y mejorar las propiedades de las puertas metálicas: resistencia a manipulaciones, propiedades de protección, conservación del calor, aislamiento acústico y térmico y control de olores. La empresa busca fabricantes de puertas interesados en implementar la tecnología en sus procesos de producción mediante acuerdos comerciales con asistencia técnica. Los empleados de la empresa están preparados para instalar los equipos necesarios y asesorar a los trabajadores de la compañía interesada en la tecnología.

Details

Tittle:
¿ Russian company developed technology of the metal doors manufacture by bending of the unwelded solid door leaf for producers of metal doors.
Summary:
A Russian company from Ulyanovsk manufactures all type of metal doors. The company developed technology of the metal doors manufacture by bending of the unwelded solid door leaf. The technology allows to significantly increase the production rate and improve the properties of the metal doors. The company is interested in cooperation on technology infusion in production under the commercial agreement with technical assistance.
Description:
A Russian produ¿er of metal doors developed own technology, which resolves the issues of the following methods:
Roll-welded technology and technology by bending of the unwelded solid door leaf are the most used technologies for metal doors manufacturing. In addition, the roll-welded technology accounts for 80% of door products market. The manufacturing of welding structure based on using of hot-rolled metal with more high physical specification in regard to mechanical action and noise insulation. However, during the metal doors manufacturing process for fixing system of the metal skin plates is used electric welding. As the result, the welds can be brittle, which affects the total resistance of doors (low tamper resistance).
It can also lead to deformation and ultimately lead to jamming. Doors, which are made according to the second technology, have high protective rate, however they can be susceptible to corrosion and rust, and also they have heavy weight. Metals for doors manufacturing have the low noise and heat insulation. Therefore, the doors of this design are appropriate for wind porches, offices and cottages, where do not require good insulation.
The company from Ulyanovsk offered a solution of these problems. The company developed own technology for the metal doors manufacturing. The main point of the development is in that the door leaf can consist of one or two of bent metal plate. So by bending their edges it is the obtaining of termination for double-leaf constructions. Thus the welding is only necessary for welding of stiffening cleat, pockets for door locks, etc. So the doors have the tamper resistance, high protective properties, the heat conservation, noise and heat insulation and it does not pass the smell.
The company is interested in cooperation with steel doors manufacturers to implementation the technology in their production. Company employees prepared to install the necessary equipment, as well as to conduct training and advising employees of the partner company. Production of metal doors according to technology of the Ulyanovsk company will become a result of the specified cooperation. It will influence improving quality of products of the potential partner. All technical assistance will be provide by the Russian partner.
Advantages and Innovations:
Owing to the method of bending of the unwelded solid door leaf, increases the corrosive resistance of the doors, the tamper resistance, in addition, it has noise and heat insulation. So there are no welds on the door leaf. According to manufacturing of roll-welded technology and technology by bending of the unwelded solid door leaf, the quantity and the quality of the welds can be a reason of reduction of the parameters. Also there is the unique opportunity to emboss on the door leaf surface.
Stage of Development:
Already on the market
IPs:
Patents granted
CommeR Statunts Regarding IPR Status:
2013, Russia

Partner sought

Type and Role of Partner Sought:
Type of the partner: SME, industrial company.
Field of activity of the required partner: metal (entrance) doors manufacturer.
Role of the potential partner: the company has to be ready to implement new technology of production of the metal doors, for the purpose of development of own business.

Client

Type and Size of Client:
Industry SME 11-49
Already Engaged in Trans-National Cooperation:
Si
Languages Spoken:
English

Keywords

Technology Keywords:
02002008 Unión (soldadura, pegado)