Con esta herramienta te facilitamos un acceso a todas las ofertas y demandas de tecnología europeas y a búsquedas de socios para participar en propuestas europeas de I+D publicadas en la red Enterprise Europe Network, pudiendo filtrar los resultados para facilitar las búsquedas más acordes con tus necesidades.

¿Quieres recibir estos listados de oportunidades de colaboración en tu correo de forma periódica y personalizada? Date de alta en nuestro Boletín

Los términos de búsqueda han de ser en inglés.

Diseño y fabricación de condensadores de gas en frío para recuperación de calor de gases de combustión en plantas de conversión de residuos a energía

Resumen

Tipo:
Demanda Tecnológica
Referencia:
TRES20151112001
Publicado:
08/11/2016
Caducidad:
21/05/2017
Resumen:
Una pyme vasca busca socios con conocimiento y experiencia en diseño y fabricación de condensadores de gas en frío para centrales energéticas. La empresa necesita especificaciones para desarrollar la formulación final de un revestimiento avanzado para tubos de acero al carbono que se aplica en instalaciones de recuperación de calor de gases de combustión. La empresa busca socios con el fin de establecer acuerdos de comercialización con asistencia técnica, fabricación o cooperación técnica para llevar a cabo las pruebas preindustriales.

Details

Tittle:
Cold end gas condenser design and manufacturing for combustion fumes heat recovery in waste-to-energy plants
Summary:
A Basque SME is looking for partners with knowledge and experience in the design and manufacturing of cold end gas condensers for energy plants. The company requires specifications in order to develop the final formulation of an advanced carbon steel tubes coating to be applied in fume heat recovery installations. A commercial agreement with technical assistance, a manufacturing agreement or a technical cooperation to carry out a pre-industrial demonstration is what the Basque SME is looking for
Description:
A Basque small company that designs and produces tailor made ceramic -Y- cermet formulations wants to produce a new specific product for combustion fumes heat recovery and condensation technologies. Therefore, it is looking for partners with track background in the designing and putting into operation of cold end gas condensers for energy plants.

Since internal ceramic coating in tubes is key to protect them against corrosion, the Basque SME now requires manufacturing and operation specifications in order to develop the final formulation of an advanced carbon steel tubes coating to be applied in fume heat recovery installations.

After technical studies carried out in laboratory, the Basque company thinks that they will be able to launch a product with the following major advantages if the right partner is found:
· A cheaper old End Flue Gas Condenser: using coated carbon steel will allow the building of industrial scale well over 20MWh of recovered heat with short return of Investment periods.
· Recovery of the sensible -Y- latent heat (by condensation) of the fumes, increasing the thermal efficiency of the plant in around a 10%.
· Fumes are extremely clean and harmless to the environment because acid rain is produced in the plant
· This acid "New Water" can be easily neutralized with soda and employed in other industrial applications with no need (or reduction) of the use of water from grid or nature.

Just to give an idea of the water recovery potential, the company estimates that in a Power Plant generating 50MW of electricity, the recovered "acid rain water" can be around 12 - 20 Tmh-1 due to the right application of internal coating in the tubes
Technical Specification or Expertise Sought:
The company lacks experience and knowledge in the design, manufacturing and operation of condensers so they would like to set up a collaboration with a partner that will provide this knowledge and then define and carry out a validation procedure so they can develop a competitive coating formulation for this applications. Some issues that need to be addressed are:

· If in a condenser all the heat in the form of hot water (around 100 ºC - 212ºF) can be used in other heating needs at the plant (biomass dryers, etc.) or used for District Heating -Y- Cooling.
· If part of the fumes (basically N2 + CO2 + some water) can be used to warm and feed greenhouses
· If these clean -Y- dry exhaust fumes are easier to capture its CO2 than existing alternatives

Partner sought

Type and Role of Partner Sought:
The partner sought has to be a company that has experience and knowledge in the design, manufacturing and operation of condensers. Thus, the partner would be able to set up a collaboration with the Basque SME in order to provide this knowledge and then define and carry out a validation procedure a competitive coating formulation for this applications can be developed.

Client

Type and Size of Client:
Industry SME <= 10
Already Engaged in Trans-National Cooperation:
Si
Languages Spoken:
English
Spanish